This 7inch colour TFT monitor uses high definition colour LCD panel which offers almost 4 times more pixels than the other standard 7 screens. It has 3 AV inputs, 2 of which are sound enabled, which means that you can hook up the monitor to a DVD player., mp4 player etc. , to play video or hook it up to a reverse camera with microphone for better security.
It uses standard 4PIN connectors to connect to the cameras which will provide power to each camera attached. There are trigger wires with adjustable time delays on the inputs to enable indicators to be used to trigger an AV channel.
This 7 monitor reverse camera kit is suitable for 12V or 24V vehicle. It has voltage overload protection and reverse polarity protection to ensure the monitor and cameras are not damaged by fitting errors. It is mounted by a substantial U-bracket and sunshade to keep the sun off the monitor.
It has stylish touch button control on the front panel of monitor. It has built-in light sensor with automatic adjustment, the monitor will dim itself automatically at night to avoid glare.
Product Highlights
High definition 800x480
Pixels screen (2400Hx480V). Beware of other sellers claiming to sell 1440Hx234V screens. 1440Hx234V = 480x234 pixels = lower resolution screen.
Built in fusebox (No more messy box dangling on the dash)
3 AV inputs
Can be connected up to 3 reversing cameras
Light sensor automatic adjustment
Monitor will dim itself automatically at night no more manual adjustment when the screen gets too bright at night
Rotational bracket- Allow monitor to be mount on the dash roof of truck/caravan/car or anywhere that you find suitable
Monitor with 4 Angle viewing Switch
Image can be adjusted for horizontal vertical mirror and normal viewing
This monitor reverse camera kit can be used with truck/caravan/bus/car
16:9/ 4:3 switch freely
Heavy duty night vision IR CCD Reversing camera - Get CCD not CMOS if you want to view the camera while driving. CMOS camera are not designed to work for long period otherwise they could get damaged easily
2x10M advanced 4 PIN cables
Allows the monitor to power up the cameras no need to connect another power cable to camera (connect and disconnect the cables between your caravan/trailer easily)
Built-in loud speaker with AV-IN
3 ways video input and 2 ways audio input
Show rearview automatically when the reverse gear is engaged
Easy to install- You can DIY as long as you can locate your vehicle's 12V/24V power source
Industrial grade CCD camera
High resolution wide field of view camera with in-built infrared LED night vision capability. Camera sun shade and base are constructed from a metal alloy shell to withstand vehicle shock and vibration
Heavy duty CCD camera
Made to be powered on at all times ideal for viewing the rear image while in forward drive
600TVL Camera to show clear and sharp images
120 degree wide angle view
IP67 waterproof withstands tough conditions (eg. bush travel)
CCD image sensor (made by Sharp Company) outputs digital signals that has better picture clarity, colour contrasting and sharpness than CMOS camera
With 18 individual Infrared(IR) LED - it shows clear images in low light especially at night circumstances
Hard metal cased waterproof and mudproof
We are so confident with our reversing camera that we will provide 12 months replacement warranty if the reversing camera becomes faulty within the 12 months period
Video : 3 Channel video input
V1/V2/V3 - 1 AV input is connected to the reverse camera powered from the reverse light which will switch automatically when reverse gear is induced, the other AV input can be connected to another reverse camera *optional, powered by battery to show the rear image at all time, perfect for truck or caravan that need to monitor the rear al the time
Recommended for Buses, trucks, Heavy Equipment Vehicles
This camera is a necessity. Mount at the recommended place and enjoy reversing without worries
Auto camera switch
This system also comes with 3 trigger wires for cameras. Once a trigger wire is activated e.g. when the reverse gear is induced it will show the rearview automatically or when the vehicle is put on the turn Right signal the monitor will switch to the Right camera automatically to give clear view on the right side of vehicle before making a turn
Item Description
Screen Size: 7 Digital TFT panel with Sunvisor
Resolution: 800x480
Aspect Ratio: 16:9 image
Video Input: 3 way video input- 2 way audio input, with AV-IN
Power Supply: DC9V-32V
Recording time: 70 Min
System: PAL/NTSC Auto Switching
Menu: OSD, Remote Control
Speaker: Built-in Loud speaker
Varying languages display
Bracket: with stand and U-shape bracket
Light Sensor: Automatic adjustment
Reverse Camera: 18 IR LEDs, Night vision supported
Delivery for this item usually takes between 2 and 7 days, longer delays can be expected for locations outside major capital cities. You may receive this item is a separate delivery if you are purchasing multiple items at the same time.
Online-Only: This item is not available for Click-&-Collect.
item code: 83_gear7erv4pin80020
We offer the following payment methods for this item (additional options are available for other items)
Credit Card
PayPal
ZipPay
All products are covered by a minimum 12 month warranty for domestic use and come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. (see our Warranty & Returns page for more information.)