All Categories
Thornado Petrol 3 inch Semi Trash Water Transfer Pump 7HP
In stock
SKU
38_th-wb80
$629
petrol 3 inch semi trash water transfer pump 7hp thornado
THORNADO 3 Inch 7HP Semi Trash Water Transfer Pump
The THORNADO 3 inch trash pump is a compact self-priming engine that powered by a true commercial 7HP 4 Stroke engine. This pump has the ability to pump solids up to 30mm in size.
Don't risk your job and time with a cheap quality pump!
The Thornado 3 inch trash pump comes with special features that include easy maintenance wear plate, wear resistant silicon carbide mechanical seal for long life and abrasion resistance, easy impeller removal, marine grade aluminium pump housing and supplied ready to operate complete with suction strainer.
With a suction/discharge diameter of 80mm, or 3 inches, this water pump has a maximum delivery lift of 26m and a maximum water displacement rate of 1,100 litres per minute or 66,000 litres per hour. With the ability to draw water up to 7m in height, this pump is sure to be helpful to meet your demand for cleaning trash, sludge, and dewatering fluids with high solid content.
Order your THORNADO 3 inch 7HP Trash Pump now and experience the force behind the THORNADO brand.
Features
Suitable Applications
In The Box
Pump TH-WB80
Max Flow Rate 66,000 litres/hour
Max Suction Depth 7m
Max Head Lift 26m
Max Soft Solid Size 30mm
Mechanical Seal Silicon Carbide
Included Accessories Intake Strainer, Hose Clamps, Spark Plug Wrench
Dimension (L, W, H) 555 x 435 x 40 mm
Net Weight 38kg
ENGINE Displacement 212cc
Engine Type 4 Stroke OHV Air Cooled
Engine Model TH-070QR (7HP)
Certification EPA phase III Compliant
Max Power HP / Rpm 7HP / 3600 Rpm
Fuel Type Unleaded Petrol
Fuel Tank Capacity 3.6L
Oil Type SAE10w-30 / SAE30
Oil Capacity 0.5L
Run time @50% Load ~3 hr
Bore x Stroke 70 mm x 55 mm
Compression Ratio 9.0 : 1
Shaft Size 19.05 mm
Keyway 4.76 mm
Valve Clearance - Intake 0.15 mm
Valve Clearance - Exhaust 0.20 mm
THORNADO 3 Inch 7HP Semi Trash Water Transfer Pump
The THORNADO 3 inch trash pump is a compact self-priming engine that powered by a true commercial 7HP 4 Stroke engine. This pump has the ability to pump solids up to 30mm in size.
Don't risk your job and time with a cheap quality pump!
The Thornado 3 inch trash pump comes with special features that include easy maintenance wear plate, wear resistant silicon carbide mechanical seal for long life and abrasion resistance, easy impeller removal, marine grade aluminium pump housing and supplied ready to operate complete with suction strainer.
With a suction/discharge diameter of 80mm, or 3 inches, this water pump has a maximum delivery lift of 26m and a maximum water displacement rate of 1,100 litres per minute or 66,000 litres per hour. With the ability to draw water up to 7m in height, this pump is sure to be helpful to meet your demand for cleaning trash, sludge, and dewatering fluids with high solid content.
Order your THORNADO 3 inch 7HP Trash Pump now and experience the force behind the THORNADO brand.
Features
- Powered by THORNADO 7HP 212cc, 4 Stroke OHV Engine
- EPA emission certified engine
- Heads to 26 metres
- Flows to 1,100 litres per minute
- Suction to 7 metres
- Soft solids to 30mm
- Low oil protection installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
- 3 Inch Suction/Discharge Ports
- Impellor and volute are made of cast iron - very hard wearing
- Roll frame
- Rubber mounting feet
- 12 Months Australia Warranty
Suitable Applications
- Transfer liquid contains solid up to 30mm size
- Dirty water from construction site
- Water transfer from septic tank
- Water contains mud, slurry, and sand
- Water transfer from dam
In The Box
- 3 inch Thornado 7HP Semi Trash Pump
- Hose Fittings
- Hose Clamps
- Intake Strainer
- Tools
- User Manual
Pump TH-WB80
Max Flow Rate 66,000 litres/hour
Max Suction Depth 7m
Max Head Lift 26m
Max Soft Solid Size 30mm
Mechanical Seal Silicon Carbide
Included Accessories Intake Strainer, Hose Clamps, Spark Plug Wrench
Dimension (L, W, H) 555 x 435 x 40 mm
Net Weight 38kg
ENGINE Displacement 212cc
Engine Type 4 Stroke OHV Air Cooled
Engine Model TH-070QR (7HP)
Certification EPA phase III Compliant
Max Power HP / Rpm 7HP / 3600 Rpm
Fuel Type Unleaded Petrol
Fuel Tank Capacity 3.6L
Oil Type SAE10w-30 / SAE30
Oil Capacity 0.5L
Run time @50% Load ~3 hr
Bore x Stroke 70 mm x 55 mm
Compression Ratio 9.0 : 1
Shaft Size 19.05 mm
Keyway 4.76 mm
Valve Clearance - Intake 0.15 mm
Valve Clearance - Exhaust 0.20 mm
Shopping FAQ:
Delivery for this item usually takes between 2 and 7 days, longer delays can be expected for locations outside major capital cities.
You may receive this item is a separate delivery if you are purchasing multiple items at the same time.
You may receive this item is a separate delivery if you are purchasing multiple items at the same time.
Online-Only: This item is not available for Click-&-Collect.
item code: 38_th-wb80
We offer the convenience of choosing from several common payment methods including up-font payments and many popular pay-over-time options in our secure checkout online: 
- Credit Card
- PayPal
- Afterpay
- ZipPay
- Openpay
All products are covered by a minimum 12 month warranty for domestic use and come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
(see our Warranty & Returns page for more information.)
(see our Warranty & Returns page for more information.)